How to use heat shrink tubing?

Heat shrink tubing is a versatile tool that can be used in a variety of ways. It saves the wires from chemical, abrasion, weather while color coding them. It is also great for bundling the wires. Being a do it yourself activity, everyone can do it. Here is a simple guide, to help you with the heat shrink tubing.

Process of using Heat Shrink Tubing

Correct size of tubing

The first thing that you should do is select the right kind of heat shrink tubing. There are two things that you should remember while selecting the tubing: the diameter after shrinking and the pre-shrinkage diameter. It is important that the after shrinkage diameter is smaller than the diameter of area you are insulating. This ensures that there is proper insulation.

Cutting to the size

Next step is to cut the tubing. While cutting be sure that you allow the minimum of 1/4" overlap over any existing connectors. As the heat shrink tubing also shrinks lengthwise, be sure that you cut right. You can cut the tubing easily with the normal scissors.

Placing Heat Shrink Tubing

While using the tubing for the wire, slide the heat shrink tubing over the center of the spliced wired and overlap the tubing on both sides. Make sure the spliced area is entirely covered.

Temp check!

Every heat shrink tubing has different specifications. Make sure you check the temperature specification beforehand so that the tubing does not burn. You can use heat shrink oven or a commercial heat gun to shrink the tubing. Uncontrolled heat can cause uneven shrinkage. Do not use open fire or flame to shrink the tubing. It can result in burning of tubing and insulation failure.

Heating

To shrink the tubing, apply the heat evenly over the surface. Make sure the heat is applied to the diameter of the tubing. Continue applying the heat until the tubing is uniformly shrunken. It should conform to the shape of the splice or thing that it is covering. As soon as it takes the shape, remove the heat. Before using or applying stress, make sure you let the tubing cool.

Want to know more? Contact KC Electronics. They are the leading electronic company with years of experience and an extensive inventory of electronic products.

What Are Mil-Spec Wires And Its Uses?

Military is the backbone of any country. Developed countries like the United States, Russia, United Kingdom, and China spend billions of dollars on military equipment. According to the data available on various Internet sources, the US spends more than any country in the military. The U.S. military budget is $824.6 billion. In 2015, a total of $598.5 billion was spent by the US government that included all regular activities of the Department of Defense; international military assistance; war spending; nuclear weapons spending; and another Pentagon-related spending.

In short, there are numerous equipment and devices that are required for the smooth working of military equipment. Everything must be according to the military specifications and designs. In this blog, we will discuss the mil-spec wires. Wires are the most basic component that is required to connect different devices. Let's have a look at these specialized wires.

What are mil-spec wires/ cables?

Mil-Spec wires are also known as military specification wires. They are the wires specially designed and created according to the military specifications. The wires are specifically designed for the harshest climates.

Where can these wires be used?

As discussed above, these wires are manufactured and designed to withstand extreme conditions. These wires can be used for high frequency and high-temperature applications. Other applications of military specified wires are-

Airframe wire Antennas Point to point connection Bus-bar Ground wire For moving parts wiring Shielding and protective covering

The US government, Boeing, Lockheed Martin, and Raytheon totally depend on Mil-Spec wire.

What are the other areas where mil-spec can be used?

The area and the field depend on the working and need. Mil-Spec wire is manufactured specially to meet robust needs. So that they can operate in challenging tasks, and in harsh weather conditions such as in deserts where the temperature is above 50-degree Celsius and in glaciers where the temperature is in minus thirties.

Buying a mil-spec wire is very difficult and challenging task. To meet the parameters of the military is very difficult. If you want to buy them, Consult- KC Electronics. For more information, visit- https://www.kcelectronics.com/

Things You Should Know About Heat Shrink Tubing

Heat shrink tubing is one of the most valued additions in a toolbox. Ask any individual who works with wiring, he/she will tell you that the heat shrink tubing is a blessing straight from the god. Whether you want to clean up the wiring circuit, add a grip to your tools, differentiate the set of keys or just want to repair your laces, the tubing works everywhere. Despite the huge list of uses (creative and otherwise), people know very little about the tubing. Here is everything you need to know about heat shrink tubing.

                                             

What is heat shrink tubing?

It is simply a tube fashioned out of the cross-linking polymer that contracts to its original shape when heat is applied. The shrinking happens because the polymer is exposed to radiation that changes the bonds between the atoms of the polymer. In simple words, it is a plastic tube that shrinks with heat.

Benefits of the tubing

The main benefits of the tubing are its ability to insulate the wires. With the heat shrink tubing, you can protect the wires and circuits from the elements of environmental damage such as water, heat, oils, and more. The top benefits of the tubing also include its creative uses.

Traditional insulation vs heat shrink tubing

The tubing offers heat resistance and durability that traditional insulation cannot provide. Basically, the heat shrink tubing outperforms the traditional insulation. While the majority of tubing can be installed manually, a few need heavy machinery to do so. 

How to select right heat shrink tubing?

• While buying the tubing keep these three things in your mind:
• Know the maximum diameter of the cable. This will help you select the right size of tubing.
• Know about the temperature range of the environment you are planning to put the tubing in.
• Know about the wall thickness as it will affect the durability and rigidity of the tubing
• Know about the resistance you want in the tubing

Want to know more? Contact KC Electronics. They are the leading electronic company with years of experience and an extensive inventory of electronic products.

The creative uses of Heat Shrink Tubing

Once in our lives, we all have used heat shrink tubing. It an indispensable addition to the toolbox of any person. Whether you are a homeowner or a businessman, you will find that the heat shrink tubing with its numerous benefits can be used almost everywhere. The tubing came into being in the late 1950s. Although the Raychem Corporation pioneered the technique and manufacturing of heat shrink polymers, the tubing is now manufactured by numerous companies all around the globe.

What is heat shrink tubing created from?

The majority of plastics burn when they come in contact with heat. However, the heat shrink tubing shrinks when it comes in contact with the heat. This is due to cross-linking. The polymer is exposed to radiation which changes the bonds between the polymer’s atoms. Once the process of cross-linking is done, the polymer can be stretched to the desired shape and it automatically shrinks back to its original shape when heat is applied.

Uses of heat shrink tubing

The tubing is generally used in the electrical field for protection of the cables and wires. Its uses include:

• Keeping water and dust away from cable splices
• Creating a barrier between chemicals and wiring
• Neatly cutting the end of the braided sleeving
• Color coding the cables
• Joining multiple wires together

Creative uses of heat shrink tubing:

1. Silencer

The tubing can be used to minimize the things that often make noise at wrong times. You can use the tubing on keys, dog collars or the sounds in your car or bicycle. Just wrap the piece of tubing around the keys and use a heat gun to shrink it. You can do same for the metal piece on the dog collars. 

2. Easy Grip

The heat shrink tubing works best as a grip on various equipment. Whether it is your daily tools, sporting equipment or your stationery, you can easily regrip them with the tubing. When the old grips have been reduced to jagged pieces, all you need to do is cover them with the heat shrink tubing and apply heat. Your equipment would become good as new. The tubing can also be used to prevent the sharp edges or teeth from helping hands to scratch the equipment.

3. Charging wire protector

No matter how careful we are with our charging cable, we always end up breaking them. There is a solution now. If you want to protect your charger cable or want to prevent the wires from breaking, all you need is a piece of tubing. Place the tubing on the flimsy parts of the charging cable that tend to get broken. 

4. Laces Repair

The laces get annoying when their plastic ends break and fall off. This results in fraying

lances. With the piece of tubing, you can bring the fraying of laces to an end. Just cover the plastic end of the lace and apply heat.

Want to know more? Contact KC Electronics. They are the leading electronic company with years of experience and an extensive inventory of electronic products.

Everything about multi-conductor wires

Electricity plays a big role in our lives, so does the multi-conductor wires. There is rarely any place in the home where these wires are not used. Even outside the home, the wires provide energy to numerous devices. However, as the use of wire involves electricity, there is a huge amount of risk associated with the use of the wires. 

Types of multi-conductor wires

Understanding the wires, before you go in and use them is important. Different types of wires are used for different purposes. Even if you are not the one doing the electrical wiring, it is important to have the knowledge.

• Shielded wires

The shielded wires are multi-conductor wires created from copper tape and a film of a conductive polymer which is covered in the insulated jacket. The shielded wires decrease the electromagnetic radiation and electrical noise. It keeps the signal steady and decreases the interference with other appliances.

• Unshielded wires

The unshielded wires do not have the shielding jacket and thus there is a bit of interference with the other devices

signals. They are most preferred to cancel the electromagnetic interference. This type of cable is in office LAN’s and other cabling systems. Flexible, thin and lightweight, these wires are also inexpensive and versatile.

Uses of multi-conductor wires

With different wires, the uses differ. The unshielded wires are more useful for the office LAN wiring rather than the shielded ones. However, shielded or unshielded, without multi-conductor wires it would be very difficult to use the devices or to enjoy the basic amenities of life.

• Electronic devices

The basis of smart devices of today is the multi-conductor wires. Without them, you won’t be able to use the smartphones, tablets, laptops, and other devices. The wires integrate complicated circuitry and power supply in the devices.

• Transportation

The full potential of the modern ways of transportation can be fully benefited by the right kind of wiring. The multi-conductor wiring connects each circuit of the cars, buses, trucks, trains and more, and makes sure that they keep running safely.

• Home

Your bedroom, bathroom, porch, garden, and kitchen with its all appliances are available with the multi-color wires. All the comforts of the modern era are available with the presence of these wires. 

The multi-conductor wires are one of the most important things of the electrical devices. If you want to buy multi-conductor wires or want to know more, contact KC Electronics. They are the leading electrical distributor in the country.

A Guide to Heat Shrink Tubing

Heat shrink tubing is a perfect to use for bundling the wires, cables and for other industrial applications. Shrink tubing is designed to shrink to fit when they get heat. It is known for its durability, strength, and versatility. Shrink tubing is available in different variety of materials. In this blog, we will discuss uses and different types of the tubing.

Different Types of Heat Shrink Tubing-

• Shrink tubing are made up of polyolefin or nylon. When the heat is applied to the shrink tubing, it contracts and tightens around the wires.

• Some other materials, for example- fluoropolymer or PFTE can oppose the problems like- wear and tear.

• Fluoropolymer or PFTE is excellent tubing that protects the wires from the harmful chemicals and environmental changes.

• The Viton shrink tubing is a perfect example of the heat tubing that can resist a wide variety of compounds and severe temperatures.

• Shrink tubing are also made up of thermoplastic material such as- polyolefin and polyvinyl chloride. These are the most favorite choices that are used for industrial purposes.

• Every tube in shrink tubing may have a different ratio of heat shrink. This is determined when the heat is applied.

Tubing Sizing- If you want to buy a heat shrink tubing, check the size of the wire. The shrink tubing is available in different sizes. Before purchasing check the heat shrink ration. They are present in 2:1, 3:1, and 4:1. It is the ratio that shrinks down after the heat is applied to the tubing. They are available in different sizes, colors, and lengths. Research thoroughly before buying them.

Different Uses-

There are many uses of a heat shrink tubing. Basically, tubing is designed to insulate wires from the excess heat. It is just like a seal that is used to join a punctured wire or to join two or more wire connection. Shrink tubing protect the connection from the water, wind, and dust. It is used to bundle the wires together. It is used mostly to prevent strain and stress of electrical wiring which is generally affected by flexing and bending the wire at or near the connectors. Bending and flexing also destroy the surrounding insulation. It is used for wire color coding which is needed generally in aircrafts. It is used in aerospace components for sealing the connections of various components. Due to its excellent protection from the corrosion and abrasion, it is used in huge vehicles.

If you want to buy a heat shrink tubing, consult KC Electronics, the leading distributors of different electrical components.

Know More About Hook up Wires

A wire is used to connect electronic and electrical equipment. Wires are frequently used in automotive, ovens, electronic equipment, business machines, and control panels. There are many types of wires, but hook up wires are frequently used in numerous equipment. The hookup wire is a single insulated conductor wire that can be used for low voltage and low current applications. There are many different types of hook up wires that have variability in terms of voltage range (varies from 300 volts to 3000 volts). Let's discuss them-

Different types of Hook-up Wires-

Thermo Thin hook-up wire- These type of wires are reliable for the appliances that are used under the high temperature. Thermo thin hookup wire can withstand temperatures from -150˚C to +300˚C. Mostly they are picked for the defense applications, oil and gas, and other mission-critical purposes.

Wire kits- It includes a combination of 100FT bottoms of HUW with choices in both mil-spec & UL/CSA. These kits are specially designed for engineers, technicians, and researchers who work in the field of research and development (R&D) labs. Every kit includes stripping device and five reels of hook up wires in a unique, transparent dispensing tube and rack mounted. The rack arrangement and transparent dispensing tube keep the hook-up wire neat, orderly and conveniently at hand.

Ribbon Cable- Also named as multi-wire planar cable, this cable has multiple conducting cables working parallel to each other on the alike flat plane, making a ribbon wire flat and wide. Generally, they are used in computers. For example- CD drives, floppy drives, and hard drives.

Premium- The premium range provides excellent conductivity and strength for more demanding professional applications such as the appliances used in the military. These wires are available in a variety of insulations to satisfy the demands of temperature, electrical performance, resistance to- oil, solvents, chemicals, strength to resist wear and tear. It is perfect for temporary fencing and strip grazing.

PV Wire- PV wires are named as Photovoltaic wire. It is a single-conductor wire which is used to connect the solar power panels and other appliances. These type of wires can work in severe climates.

If you are looking for a hookup wire distributor, then visit KC Electronics, a leading and well-experienced distributor of various electronics and electric accessories.